Category: IoT

Happy Friday, folks! There is a really cool addition this week which I thought deserved a quick video to walk you through what it’s all about. Support for CodeChecker was just added, which means that it’s now super easy to run a wide variety of static analysis and code style rules against your Zephyr applications, and get very detailed, actionable, reports. Just keep reading, it’s literally the next section below 🙂

Codechecker support

As mentioned in the intro, this the most exciting thing for me this week. I have to admit I wasn’t familiar with CodeChecker and it really is an impressive tool. Not only is it very powerful and versatile for… well… code checking 🙂 but it also comes with a complete server infrastructure and web UI that allows you to track how many defects get added/resolved over time, collaborate with coworkers on flagging what might be false positives, etc.

After having played with CodeChecker for a few minutes today, I realized it would be even better if I would share my findings with y’all, so I recorded a video which goes through some of the cool features of the tool, and that shows you how easy it is to enable CodeChecker support for any Zephyr project.’, so I recorded a video which goes through some of the cool features of the tool, and that shows you how easy it is to enable CodeChecker support for any Zephyr project.

Check out the documentation page for more information on how to get started.

LVGL getting some love

All the glue code for LVGL, that used to live in Zephyr’s fork of the upstream LVGL repo, has now been moved to the main Zephyr repository. (PR #61300)

This will make it much easier to improve LVGL support going forward, and there are actually several pull requests lined up already that are really promising with regards to bringing significant performance improvements to LVGL in Zephyr.

Boards & SoCs

• Support has been added for the YD-ESP32 dev kit. (PR #60067)
• Support for ARM Cortex-M4F core of the phyBOARD-Lyra from PHYTEC has been added. (PR #60603)

Samples

• The USB HID Mouse sample has been updated to leverage the Input subsystem. To quote the author, “this makes the sample much simpler and smaller”.
  Any board with USB device support and a set of 4 keys defined as INPUT_KEY_[0-3] will act as a mouse when plugged to a computer (for example, pressing Key-0 will be the equivalent of a left mouse button click). (PR #61104)

Drivers

• To facilitate synchronization between heterogeneous processors, a hardware spinlock driver API has just been introduced, with a driver implementation for Sequans SoCs. (PR #60625)
• ADC support is now available for ESP32-S3. (PR #60623)
• A new IPM (inter-process mailbox) driver is available for AMD-Xilinx platforms. (PR #61008)
• PWM support is now available for TI cc13xx_cc26xx. (PR #60828)
• New Synopsys DesignWare timer driver (PR #60783)
• New HyperRAM driver for Winbond W956A8MBYA. (PR #59845)
• Microchip XEC tachometer sensor now supports low-power mode. (PR #60718)
• Added support for Ambiq watchdog driver. (PR #61417)

---

A big thank you to the 9 individuals who had their first pull request accepted this week, 💙 🙌: @tnmysh, @0bijian0, @jcsxdev, @pbalsundar, @moradelk, @cesta2z, @Frauschi, @Christian-Marx, and @blemouzy.

As always please feel free to jump in with your thoughts or questions in the comments below. See you next week!

If you enjoyed this article, don’t forget to subscribe to this blog to be notified of upcoming publications! And of course, you can also always find me on Twitter and Mastodon.

Catch up on all previous issues of the Zephyr Weekly Update:

I’ve made a terrible mistake! I went on vacation for a few weeks, and just before that also missed a couple of weekly updates due to bank holidays and a busy schedule… Now, I have 750+ merged pull requests to catch up on to try and give y’all a sense of what recently landed in Zephyr. I will do my best to do justice to all the great work from the community over the past month, but I apologize in advance if I miss a few things here and there. I’ll try to resume to a normal schedule next week!

Support for ext2 filesystem

In addition to FatFS and LittleFS, Zephyr now supports ext2fs! Heartfelt kudos to Franciszek Zdobylak for the amazing work on this one.

Together with this very significant contribution, a new file system sample has been introduced to make it easier to play with FAT and ext2 on either an SD card or internal/external flash storage.

LwM2M engine now 2x more power efficient

The OMA LwM2M device management protocol is primarily aimed at low-power devices operated over constrained, also low-power, networks. A recent refactoring of the LwM2M engine makes it possible to rely on a tickless approach for managing the LwM2M communications. The engine only wakes up when needed, as opposed to ticking (potentially needlessly) every 0.5s.

See new LWM2M_TICKLESS Kconfig option and PR #60887. Some very impressive charts there demonstrating the 2x improvement on energy efficiency (actual power consumption impact might differ based on the actual hardware).

Boards & SoCs

• Initial support was added for the STM32WBA series from ST Microelectronics. It leverages the STM32U5 architectures and focuses on low-power and Bluetooth® Low Energy 5.3 use cases. (PR #60138)
• Silabs SLTB009A board is now supported. It boasts an EFM32 Giant Gecko 12 MCU (Cortex-M4) and targets ultra-low energy applications. (PR #60137)
• Intel Alder Lake (Intel’s codename for the 12th generation of Intel Core) reference boards are now supported. (PR #61072)
• CY8CKIT-062S4 Pioneer kit from Infineon is an ultra-low-power device specifically designed for battery-operated analog sensing applications based on a 150 MHz Cortex-M4 CPU coupled to a 100 MHz Cortex-M0 for supporting low-power operations. (PR #60413)
• NXP VMU RT1170 is now supported. In case you didn’t know, VMY stands for Vehicle Management Unit — think rugged and wide range of temperatures supported, and tons of onboard sensors: IMUs, barometer, magnetometer, GNSS module, … And, of course, it supports CAN bus! (PR #61192)
• Google Twinkie is a dongle for, among other things, monitoring USB Power Delivery traffic. Twinkie V2 is now supported in Zephyr. (PR #54286)
• The Intel Agilex5 FPGA platform is now supported. (PR #61192)
• The R8A77951 and R8A77961 SoC series from Renesas are now supported, with added support for the H3ULCB and R-CAR Salvator XS M3 boards. (PR #57172)

Shields

• Added support for the Adafruit CAN Picowbell shield, which joins the other Microchip MCP2515 based shields that were already supported. (PR #59820)

• The Semtech SX1276MB1MAS LoRa shield is an Arduino compatible shield based on the SX1276 LoRa transceiver from Semtech. Now supported! (PR #59889)

Drivers

• New ADC driver added for Silicon Labs Gecko Series 1 (EFM32). (PR #60002).
• New Ethernet driver added for STM32 H573I DK. (PR #60152)
• USB-UDC is now supported for STM32 MCUs. (PR #53408)
• Adds drivers for pwm on xmc4xxx using Capture Compare Unit 4 (CCU4)
• Initial support for Infineon CAT1 counter driver.(PR #59626)
• New NPCX flash driver for Nuvoton SoCs. (PR #60024)
• New Andes qspi-nor flash driver means that you can now enjoy the ability to use flash memory on the Andes ADP-XC7K AE350 board. (PR #58718)

Display

• A new auxiliary display driver has been added, namely the PTC PT6314 VFD controller. (PR #59728)
• The Rocktech RK055HDMIPI4M MIPI Display is a 5.5 inch, 720x1280px TFT display + capacitive touch panel and can now be used as a Zephyr shield with NXP boards featuring a 40-pin FPC connector. (PR #55493)

• Any wearable geeks out there? The G1120B0MIPI smartwatch display from NXP is now supported, also bringing support for the RM67162 display controller that it includes. Similar to the Rocktech display above, it is available as a Zephyr shield. (PR #57578)

Sensors

• BMI08x IMU sensors from Bosch Sensortec are now supported. (PR #51545)
• Added support for the Isentek IST8310 3-axis magnetic sensor. (PR #60639)

• DFRobot A01NYUB distance sensor, is now supported. It is a waterproof ultrasonic sensor module which can measure distance in the 28-750cm range with 1mm of resolution. (PR #58377).
• ICM42688 motion sensor now has an emulated version in-tree. (PR #61051)
• Existing TI LP503x LED driver has been extended to now support all variations of LP50xx devices. (PR #59852)

Bluetooth

• New samples are available for the TMAP (Telephony and Media Audio Profile) broadcast functionality, more specifically Broadcast Media Sender and Broadcast Media Receiver.
• Added support for advanced settings for QoS of isochronous channels. (PR #53945)
• Common Audio Profile shell now allows to start specific audio configurations based on the BAP specification. (PR #58914)

Miscellaneous

• TrustedFirmware-M (TF-M) version upgraded to 1.8. (PR #60226)
• There is now an MCUmgr and a Simple Management Protocol (SMP) client. (PR #56934)

---

A big thank you to the 48 individuals who had their first pull request accepted since last time I posted, 💙 🙌: @dbongartz, @KyraLengfeld, @lutb-ot, @DaWei8823, @HoZHel, @rnpnr, @supcik, @xqinx, @TimMThomas, @joeker64, @bdmendes, @benner, @dluke62, @JDuchniewicz, @kobelev-dev, @mfikes, @shaggygi, @wsipak, @KarthikL1729, @Dalachowsky, @Crzyrndm, @valentinkorenblit, @avolkov-1221, @wangwillian0, @ggrs, @gdengi, @radsemijmitchell, @man-gc, @Flameeyes, @janhenke, @rubienr, @deining, @kmeinhar, @slpp95prashanth, @msobkowski, @vdsh-sc, @lawrencek52, @napl-nordic, @mbolivar-ampere, @aronlander-pe, @konradderda, @chencaidy, @MarGasiorek, @MarcelKr, @PetervdPerk-NXP, @ioannis-karachalios, @antoinebout0, @dey-r.

As always please feel free to jump in with your thoughts or questions in the comments below. See you next week!

If you enjoyed this article, don’t forget to subscribe to this blog to be notified of upcoming publications! And of course, you can also always find me on Twitter and Mastodon.

Catch up on all previous issues of the Zephyr Weekly Update:

There’s no such thing as summer holidays for the Zephyr community, it would seem. It’s very nice to see ACPI support being introduced this week, and there’s also intereting work being done on making it easier and more flexible to run Zephyr applications natively on your development machine.

This week, I would also like to point out the Github issues that are explicitly labelled as “good first issues”. I am highlighting some of these in the article below, but generally speaking I would really encourage you to regularly check them out, as your first contribution to Zephyr might be lying there 🙂 Also, if you’re a maintainer, a kind reminder that there are probably many issues opened in your area of expertise that could be good ones for newcomers, so don’t forget to tag them as part of bug triaging!

ACPI Support

One of the biggest changes this week is the addition of initial support for the ACPI (Advanced Configuration and Power Interface) standard.

The ACPI standard has been around for over 25 years and provide a hardware abstraction layer to help with power management, auto configuration, and status monitoring of peripherals.

The new implementation is using the ACPICA open source project, and allows to discover and configure hardware components at run-time, perform power management (e.g. putting unused hardware components to sleep), and perform auto configuration tasks. You can check out the documentation of the new ACPI API here. (PR #56347)

Native simulator

Another significant change is the introduction of a new “virtual” board to be used for simulation purposes, the native simulator, a.k.a. native_sim. (PR #59302)

You may be already familiar with the native_posix which allows you to run Zephyr natively on e.g. your local Linux machine. It’s very complete, and allows to go as far as simulating a display, a real-time clock, etc. which is very handy in situation where you don’t need (or sometimes can’t) test against real hardware.

This new “native simulator” is meant to make it easier to run against a custom libC (where native_posix would typically use the host’s libC). It also makes it possible to simulate assymetric multiprocessing scenarios (several simulated MCUs, each running their own Zephyr instance).

SoCs

• Support has been added for STM32L451 SoC series from STMicroelectronics. (PR #59763)
• PR #58332 added support for the NXP MR-CANHUBK3 (see below), but also worth noting that it also brought support for the entire NXP S32K344 SoC family, a series of qualified MCUs based on the Arm Cortex-M7 and aimed at safety-critical automotive and industrial applications.

Boards & shields

• A new board from Seeed Studio has been added, the XIAO ESP32S3 (PR #59732). It is built around Espressif’s 240MHz Xtensa 32-bit LX7 dual-core processor, and supportsWiFi and BLE 5.0. And it’s super tiny!
  I am really excited about this one since this board also has a “Sense” variant that comes with a 1600x1200px camera, a micro-SD card reader, and a digital microphone, for only a few dollars more. In fact, since the initial contribution did not include the XIAO ESP32S3 Sense variant, I would love for someone to contribute it! In fact, I just opened an issue to track this, and I would recommend you look into it as your first potential contribution to Zephyr 😉

• The NXP MR-CANHUBK3 board is an evaluation board for mobile robotics applications (ex. autonomous mobile robots and automated guided vehicles for which support was added this week. (PR #58332)

• All the STM32 Nucleo-64 boards from STMicroelectronics feature a Morpho connector—think of it as an Arduino connector on steroids, as it has more pins and allows to access all the I/Os of the MCU.
  PR #59754 adds the nexus node definitions for the 15 Nucleo-64 kits supported in Zephyr, making it easier to directly manipulate the Morpho pin headers (for example ST_MORPHO_CN7_25 on the NUCLEO-L476RG would be equivalent to pin 14 on GPIO port C).

• The Arduino click shield from MIKROE can be stacked on any Arduino compatible board and exposes two mikroBUS sockets, that can be used to connect any of the hundreds (!) of Click boards available from MIKROE. It is now supported in Zephyr and exposes the two mikroBUS headers. (PR #60009)

Drivers

• New driver for Texas Instruments TLA2021, a cost-optimized, ultra-small, 12-Bit ADC typically used for system-monitoring applications (ex. battery voltage supervision, current sensing, …). (PR #57861)
• Flash SPI NOR driver now supports device power management. (PR #59647)
• New counter driver for Renesas SmartBond general purpose timers. (PR #56758)

Bluetooth

• Kconfig options for Bluetooth Mesh have been reorganized to be easier to manipulate. Among other things, options are now grouped according to the protocol layer (network, transport, etc.) they are related to. (PR #59909)
• A new optional module allows to collect statistics related to mesh frames. It can be helpful for measuring performance, packet loss, etc. The module can be turned on via BT_MESH_STATISTIC Kconfig option. It also comes with shell commands to help access the statistics interactively. (PR #59962)
• A new shell module has been added for TMAP (Telephony and Media Audio Profile). (PR #58915)

Miscellaneous

• Our documentation website docs.zephyrproject.org provides seamless integration of Doxygen documentation in the general documentation pages. This used to be provided by the breathe Python library, but as of this week we’ve switched to using docleaf, an improved and faster alternative to the former, made by its original author. One of the biggest improvement is around incremental builds, as rebuilding the documentation when only a few things have been changed is now much faster! Thanks Michael for this awesome first contribution to the project!
• A lot of work is being done on the POSIX front to get to a point where the PSE52 profile is fully supported for the upcoming LTS v3 release. There are dozens of open issues flagged as “Good First Issues” that I encourage you to look at if you’d like to contribute to Zephyr but don’t know where to start. Plus, you will likely learn a few things about threads, semaphores, and more! 🙂

---

A big thank you to the 14 individuals who had their first pull request accepted this week, 💙 🙌: @najumon1980, @robertoxmed, @mku514k, @jaiiarora, @andy9a9, @Maxwelltoo, @michaeljones, @jasperjonker, @EricNRS, @bperseghetti, @Chenhongren, @faloj, @MrMarteng, and @ithinuel.

As always please feel free to jump in with your thoughts or questions in the comments below. See you next week!

If you enjoyed this article, don’t forget to subscribe to this blog to be notified of upcoming publications! And of course, you can also always find me on Twitter and Mastodon.

Catch up on all previous issues of the Zephyr Weekly Update: