Benjamin Cabé

Using MQTT-SN over BLE with the BBC micro:bit

The micro:bit is one of the best IoT prototyping platforms I’ve come across in the past few months.

The main MCU is a Nordic nRF51822 with 16K RAM and 256K Flash. A Freescale KL26Z is used for conveniently implementing a USB interface as well as a mass storage driver so as deploying code onto the micro:bit is as simple as directly copying a .hex file over USB (if your familiar with the mbed ecosystem, this will sound familiar :-)).

The board is packed with all the typical sensors and actuators you need for prototyping an IoT solution: accelerometer, compass, push buttons, an LED matrix, … What’s really cool, is the built-in BLE support, combined with the battery connector, making it really easy to have a tetherless, low-power [ref]You should keep in mind that the micro:bit, like other similar boards, is meant to be a prototyping platform, and for example having the KL26Z core taking core of the USB controller might not be ideal battery-wise, if you only care about doing tetherless BLE communications.[/ref], IoT testing device.

So how does one take the micro:bit and turn it into an IoT device? Since there is no Internet connectivity, you need to rely on some kind of gateway to bridge the constrained device that is the micro:bit to the Internet. You can of course implement your own protocol to do just that, but then you have to basically reimplement the wheel. That’s the reason why I thought the micro:bit would be ideal to experiment with MQTT-SN.

You can jump directly to the video tutorial at the end of the post, and come back later for more in-depth reading.

What is MQTT-SN and why you should care

If I were to over simplify things, I would just say that MQTT-SN (which stands for “MQTT for Sensor Networks”, by the way) is an adaptation of the MQTT protocol to deal with constrained devices, both from a footprint/complexity standpoint, and to adapt to the fact constrained devices may not have TCP/IP support.

MQTT-SN is designed so as to make the packets as small as possible. An example is the fact that an MQTT-SN client registers the topic(s) it wishes to us against the  server, this way further PUBLISH or SUBSCRIBE exchanges only have to deal with a 2-byte long ID, as opposed to a possibly very long UTF-8 string.

Like I said before, you really don’t want to reimplement your own protocol, and using MQTT-SN just makes lot of sense since it bridges very naturally to good ol’ MQTT.

Setting up an MQTT-SN client on the micro:bit

The MQTT-SN supports the BLE UARTService from Nordic, that essentially mimics a classical UART by means of two BLE characteristics, for RX and TX. This is what we’ll use as our communication channel.

The Eclipse Paho project provides an MQTT-SN embedded library that turns out to be really easy to use. It allows you to serialize and deserialize MQTT-SN packets, the only remaining thing to do is for you to effectively transmit them (send or receive) over your communication channel – BLE UART in our case.

In order to show you how simple the library is to use, here’s an example of how you would issue a CONNECT:

MQTTSNPacket_connectData options = MQTTSNPacket_connectData_initializer;
options.clientID.cstring = microbit_friendly_name();
int len = MQTTSNSerialize_connect(buf, buflen, & options);

int rc = transport_sendPacketBuffer(buf, len); /* wait for connack */

rc = MQTTSNPacket_read(buf, buflen, transport_getdata);
if (rc == MQTTSN_CONNACK) {
  int connack_rc = -1;
  if (MQTTSNDeserialize_connack( & connack_rc, buf, buflen) != 1 || connack_rc != 0) {
    return -1;
  } else { // CONNECTION OK - continue
  }
} else {
  return -1;
}

Now what’s behind the transport_sendPacketBuffer and transport_getdata functions? You’ve guess correctly, this is where either send or read a buffer to/from the BLE UART.
Using the micro:bit UART service API, the code for transport_getdata is indeed very straightforward:

int transport_getdata(unsigned char * buf, int count) {
  int rc = uart->read(buf, count, ASYNC);
  return rc;
}

You can find the complete code for publishing the micro:bit acceloremeter data over BLE on my Github. Note that for the sake of simplifying things, I’ve disabled Bluetooth pairing so as connecting to a BLE/MQTT-SN gateway just works out of the box.

MQTT-SN gateway

There are a few MQTT-SN gateways available out there, and you should feel free to use the one that floats your boat. Some (most?) MQTT-SN gateways will also behave as regular MQTT brokers so you won’t necessarily have to bridge the MQTT-SN devices to MQTT strictly speaking, but rather directly use the gateway as your MQTT broker.
For my tests, I’ve been pretty happy with RSMB, an Eclipse Paho component, that you can get from Github.

The README of the project is pretty complete and you should be able to have your RSMB broker compiled in no time. The default configuration file for RSMB should be named broker.cfg (you can specify a different configuration file on the command line, of course).
Below is an example of the configuration file so as RSMB behaves as both a good ol’ MQTT broker, but also an MQTT-SN gateway, bridged to iot.eclipse.org’s MQTT sandbox broker. Note that in my example I only care about publishing messages, so the bridge is configured in out mode, meaning that messages only flow from my MQTT-SN devices to iot.eclipse.org, and not the other way around. Your mileage may vary if you also want your MQTT-SN devices to be able to subscribe to messages, in which case the bridging mode should be set to both

# will show you packets being sent and received
trace_output protocol

# MQTT listener
listener 1883 INADDR_ANY mqtt

# MQTT-S listener
listener 1884 INADDR_ANY mqtts

# QoS 2 MQTT-S bridge
connection mqtts
  protocol mqtt
  address 198.41.30.241:1883
  topic # out

Bridging the BLE device(s) to the MQTT-SN gateway

Now there is still one missing piece, right? We need some piece of software for forwarding the messages coming from the BLE link, to the MQTT-SN gateway.

I’ve adapted an existing Node.js application that does just that. For each BLE device that attaches to it, it creates a UDP socket to the MQTT-SN gateway, and transparently routes packets back and forth. When the micro:bit “publishes” an MQTT-SN packet, it is just as if it were directly talking to the MQTT-SN gateway.

The overall architecture is as follows:

Note that it would be more elegant (and also avoid some nasty bugs, actually[ref]RSMB expects the first packet received on an incoming UDP connection to be a CONNECT packet. If the bridge forwards everything to the gateway transparently, that may not always be the case. If, instead, it takes care of encapsulating all MQTT-SN packets properly, that means you know need only one UDP socket from your BLE/UDP bridge to the gateway)[/ref]) to leverage MQTT-SN’s encapsulation mechanism so as to make the bridge even more straightforward, and not have to maintain one UDP socket per BLE device. To quote the MQTT-SN specification:

The forwarder simply encapsulates the MQTT-SN frames it receives on the wireless side and forwards them unchanged to the GW; in the opposite direction, it decapsulates the frames it receives from the gateway and sends them to the clients, unchanged too.

Unfortunately RSMB does not support encapsulated packets at this point, but you can rely on this fork if you want to use encapsulation: https://github.com/MichalFoksa/rsmb.

Visualizing the data: mqtt-spy to the rescue!

Like in my previous article about Android Things, I used mqtt-spy to visualize the data coming from the sensors.

Note that publishing sensor data in JSON might not be the best idea in production: the MTU of a BLE packet is just 20 bytes. Those extra curly braces, commas, and double quotes are as many bytes you won’t be able to use for your MQTT payload. You may want to look at something like CBOR for creating small, yet typed, binary payloads.
However, JSON is of course pretty convenient since there’s a plethora of libraries out there that will allow you to easily manipulate the data…

Using mqtt-spy, it’s very easy to visualize the values we’re collecting from the accelerometer of the micro:bit, either in “raw” form, or on a chart, using mqtt-spy’s ability to parse JSON payloads.

Video tutorial and wrap-up

I’ve wanted to give MQTT-SN a try for a long time now, and I’m really happy I took the time to do so. All in all, I would summarize my findings as follow:

Exit mobile version